DIN 50134 - EndoLab

DIN 50134

/

/

Corrosion analysis

ASTM F1089

Corrosion of surgical instruments

ASTM F1801

Corrosion fatigue testing of metallic implant materials

ASTM F1875

Fretting corrosion testing of modular implants – Femoral stem-head interface

ASTM F2129

Corrosion test of small implants

ASTM F3044

Galvanic corrosion

ASTM F897

Fretting corrosion of osteosynthesis plates and screws

ASTM G102

Calculation of corrosion rates

ISO 13402

Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure

ISO 16429

Assessment of corrosion behaviour of metallic implantable materials

Coating analysis

ASTM F1044 / ASTM F1160

Shear strength of coatings

ASTM F1147 / ISO 13779-4

Tensile strength of coatings

ASTM F1609

Calcium phosphate coatings for implantable materials

ASTM F1854

Stereological evaluation of coatings

ASTM F1926

Dissolution test of calcium phosphate

ASTM F1978

Abrasion resistance of coatings

ISO 13175-3

General requirements bone substitutes

ISO 13179

General requirements plasma-sprayed unalloyed titanium coatings

ISO 13779-2

General requirements thermally-sprayed HA coatings

Ceramic analysis

ASTM C1499

Ceramic biaxial strength

DIN EN 843-2

Mechanical properties of monolithic ceramics

DIN EN 843-4 / ISO 14705

Hardness of ceramics

ISO 13356 / ISO 6474-1/2

Ceramic specification

PI-60 (ISO 6474)

Wear properties of ceramics

Metal analysis

ASTM E112

Grain size analysis

ASTM F136

Material properties of Ti6Al4V (extra low interstitial)

ASTM F1801

Corrosion fatigue testing of metallic implant materials

ASTM F2516

Tension testing of nickel-titanium

DIN 50134

Compression test of metallic cellular materials

ISO 16429

Assessment of Corrosion Behaviour of Metallic Implantable Materials

ISO 20160

Titanium alloy microstructure

ISO 4967

Steel nonmetallic inclusions

ISO 5832-3

Titanium alloy specification

ISO 5832-4

CoCr casting alloy specification

ISO 6892-1

Tensile properties of metallic materials

ISO 7438

Bend test

Polymer analysis

ASTM D618

Conditioning of plastics

ASTM D638

Tensile properties of plastics

ASTM D732

Shear strength of plastics

ASTM D792

Density test of plastics

ASTM D882

Plastic film tensile test

ASTM F1839

Rigid polyurethane foam according to

ASTM F2003 / ISO 5834-3

Accelerated aging of UHMWPE

ASTM F2183

Small punch test

ASTM F648

Polyethylene specification

Bone cement analysis

ASTM F2118 / ISO 16402

Bone cement fatigue

ASTM F3087

PMMA molding resin

ASTM F451 / ISO 5833

Bone cement specification

Pins and wires

ASTM F366

Fixation pins and wires - Specifications

ISO 5838-1

Metallic skeletal pins and wires - Requirements

ISO 5838-2

Dimensions of Steinmann skeletal pins

ISO 5838-3

Characteristics of Kirschner skeletal wires

Texture

ASTM F2791

Surface texture assessment of non-porous biomaterials

Scaffold

ASTM F2952

Scaffold permeability

Packaging

ASTM F1980

Accelerated Aging of Sterile Barrier Systems

ASTM F2824

Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids

ISO 11607-1

Packaging materials

Compression test of metallic cellular materials

Normative References

DIN 50134: Testing of metallic materials – Compression test of metallic cellular materials

This test method determines the strength characteristics and the deformability behavior under compression loading of 3D-printed (rapid prototyping) metallic cellular material.

EndoLab^® uses an electromechanical load frame equipped with a non-contacting video extensometer for this mechanical test.

Your contact person

Dipl. Ing. Christian Findeiss

Head of Fatigue Testing & Material Analysis, Head of Vascular Testing